Cisco 500 Series Administration Manual page 541

23
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
539
Policy Attachment (VLAN)
To attach a policy to one or more VLANs:
Click Security > IPv6 First Hop Security > Policy Attachment (VLAN).
The list of policies that are already attached are displayed along with their Policy
Type, Policy Name and VLAN List.
To attach a policy to a VLAN, click Add and enter the following fields:
• Policy Type—Select the policy type to attach to the interface.
• Policy Name—Select the name of the policy to attach to the interface
• VLAN List—Select the VLANs to which the policy is attached. Select All
VLANs or enter a range of VLANs.
Click Apply to add the settings to the Running Configuration file.
Policy Attachment (Port)
To attach a policy to one or more ports or LAGs:
Click Security > IPv6 First Hop Security > Policy Attachment (Port).
The list of policies that are already attached are displayed along with their
Interface number, Policy Type, Policy Name and VLAN List.
To attach a policy to a port or LAG, click Add and enter the following fields:
• Interface—Select the interface on which the policy will be attached.
• Policy Type—Select the policy type to attach to the interface.
• Policy Name—Select the name of the policy to attach to the interface
• VLAN List—Select the VLANs to which the policy is attached. Select All
VLANs or enter a range of VLANs.
Click Apply to add the settings to the Running Configuration file.
Security: IPv6 First Hop Security
Configuring IPv6 First Hop Security through Web GUI
Cisco 500 Series Stackable Managed Switch Administration Guide