Cisco 500 Series Administration Manual page 51

4
STEP 4
STEP 5
49
• Backup—Specifies that a copy of the file type is to be saved to a file on
another device.
Enter the following fields:
• File Type—Select the destination file type. Only valid file types are shown.
(File types are described in the
• TFTP Server Definition—Select whether to specify the TFTP server By IP
address or By name.
• IP Version—Select whether an IPv4 or an IPv6 address is used.
• IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The
options are:
- Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
- Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
• Link Local Interface—Select the link local interface (if IPv6 is used) from the
list.
• TFTP Server IP Address/Name—Enter the IP address or the name of the
TFTP server.
• (For Upgrade) Source File Name—Enter the name of the source file.
• (For Backup) Destination File Name—Enter the name of the backup file.
If you selected via HTTP/HTTPS, you can only select the Save Action: Upgrade.
Enter the parameters as described in this step.
• File Type—Select one of the following file types:
- Firmware Image—Select this to upgrade the firmware image.
- Language File—Select this to upgrade the language file.
• File Name—Click Browse to select a file or enter the path and source file
name to be used in the transfer.
If you selected via SCP (Over SSH), see
instructions. Then, enter the following fields: (only unique fields are described, for
non-unique fields, see the descriptions above)
Administration: File Management
Files and File Types
SSH Client Authentication
Cisco 500 Series Stackable Managed Switch Administration Guide
Upgrade/Backup Firmware/Language
section).
for