6
STEP 1
STEP 2
105
•
SSH Service—Whether SSH is enabled/disabled.
PoE Power Information on Master Unit: (on devices supporting PoE)
•
Maximum Available PoE Power (W)—Maximum available power that can
be delivered by the PoE.
•
Total PoE Power Consumption (W)—Total PoE power delivered to
connected PoE devices.
•
PoE Power Mode—Port Limit or Class Limit.
Detail
There is a
link next to PoE Power Information on Master Unit that, when
selected, takes you directly to the Port Management > PoE > Properties page. This
page shows the PoE power information on a per-unit basis.
The units in the stack are displayed graphically, along with the following
information for each unit:
•
Unit ID of Master Unit
•
Model Description—Device model description.
•
Serial Number—Serial number.
•
PID VID—Part number and version ID.
System Settings
To enter system settings:
Click Administration > System Settings.
View or modify the system settings.
•
System Description—Displays a description of the device.
•
System Location—Enter the physical location of the device.
•
System Contact—Enter the name of a contact person.
•
Host Name—Select the host name of this device. This is used in the prompt
of CLI commands:
-
Use Default—The default hostname (System Name) of these switches is:
switch123456, where 123456 represents the last three bytes of the
device MAC address in hex format.
Cisco 500 Series Stackable Managed Switch Administration Guide
Administration
System Settings