Regular Vlans - Cisco 500 Series Administration Manual

14

Regular VLANs

261
This section describes the GUI pages used to configure various types of VLANs.
This section describes the following processes:
• VLAN Configuration Workflow
• Default VLAN Settings
• VLAN Settings - Creating VLANs
• Interface Settings
• VLAN Membership
• Port to VLAN
• Port VLAN Membership
• Defining GVRP Settings
VLAN Configuration Workflow
To configure VLANs:
1. If required, change the default VLAN as described in the
Settings section.
2. Create the required VLANs as described in the
VLANs section.
3. Set the desired VLAN-related configuration for ports and enable QinQ on an
interface as described in the
4. Assign interfaces to VLANs as described in the
Port VLAN Membership
5. View the current VLAN port membership for all the interfaces as described in
the Port VLAN Membership
6. If required, configure VLAN groups as described in the
Protocol-based VLANs
7. If required, configure TV VLAN as described in the
VLAN and Customer Port Multicast TV VLAN
Interface Settings
section.
section.
sections.
Cisco 500 Series Stackable Managed Switch Administration Guide
VLAN Management
Regular VLANs
Default VLAN
VLAN Settings - Creating
section.
Port to VLAN section or the
MAC-based Groups
Access Port Multicast TV
sections.
and