Cisco 500 Series Administration Manual page 135

7
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
133
of the network is blocked (see
Settings)
• Limit PoE operation to a specified period.
Absolute Time Range
To define an absolute time range:
Click Administration > Time Settings > Time Range.
The existing time ranges are displayed.
To add a new time range, click Add.
Enter the following fields:
• Time Range Name—Enter a new time range name.
• Absolute Starting Time—To define the start time, enter the following:
- Immediate—Select for the time range to start immediately.
- Date, Time—Enter the date and time that the Time Range begins.
• Absolute Ending Time—To define the start time, enter the following:
- Infinite—Select for the time range to never end.
- Date, Time—Enter the date and time that the Time Range ends.
To add a recurring time range, click Recurring Range.
Recurring Time Range
A recurring time element can be added to an absolute time range. This limits the
operation to certain time periods within the absolute range.
To add a recurring time range element to an absolute time range:
Click Administration > Time Settings > Recurring Range.
The existing recurring time ranges are displayed (filtered per a specific, absolute
time range.)
Select the absolute time range to which to add the recurring range.
Configuring Ports
Cisco 500 Series Stackable Managed Switch Administration Guide
Administration: Time Settings
Configuring System Time
and Configuring LAG