Cisco 500 Series Administration Manual page 70

Stackable managed
Hide thumbs Also See for 500 Series:
Table of Contents

Advertisement

Administration: File Management
Auto Configuration/Image Update via DHCP
STEP 1
STEP 2
Cisco 500 Series Stackable Managed Switch Administration Guide
Web Configuration
To configure Auto Configuration and/or Auto Update:
Click Administration > File Management > DHCP Auto Configuration/Image
Update.
Enter the values.
Auto Configuration Via DHCP—Select this field to enable DHCP Auto
Configuration. This feature is enabled by default, but can be disabled here.
Download Protocol—Select one of the following options:
Auto By File Extension
-
the TFTP or SCP protocol depending on the extension of the
configuration file. If this option is selected, the extension of the
configuration file does not necessarily have to be given. If it is not given,
the default extension is used (as indicated below).
-
File Extension for SCP
indicate a file extension here. Any file with this extension is downloaded
using SCP. If no extension is entered, the default file extension .scp is
used.
-
TFTP Only
—Select to indicate that only the TFTP protocol is to be used
for auto configuration.
SCP Only
-
—Select to indicate that only the SCP protocol is to be used for
auto configuration.
Image Auto Update Via DHCP—Select this field to enable update of the
firmware image from the DHCP server. This feature is enabled by default, but
can be disabled here.
Download Protocol—Select one of the following options:
Auto By File Extension
-
TFTP or SCP protocol depending on the extension of the image file. If this
option is selected, the extension of the image file does not necessarily
have to be given. If it is not given, the default extension is used (as
indicated below).
File Extension for SCP
-
indicate a file extension here. Any file with this extension is downloaded
using SCP. If no extension is entered, the default file extension .scp is
used.
—Select to indicate that Auto Configuration uses
—If Auto By File Extension is selected, you can
—Select to indicate that auto update uses the
—If Auto By File Extension is selected, you can
4
68

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents