Showing, Moving, And Turning Off The Pip - Polycom HDX User Manual

Showing, Moving, and Turning Off the PIP

Polycom, Inc.
During calls using Dual Monitor Emulation with content, you can press the
Display button on the remote control to scroll through the following
screen layouts:
Polycom HDX 9006, Polycom HDX 8000 series and Polycom HDX 7000 series
systems with Hardware Version B, Polycom HDX 7000 series systems with
Hardware Version C, and Polycom HDX 6000 series systems show only two
windows in Dual Monitor Emulation.
Your system might be configured to display a Picture-in-Picture (PIP)
window. During a call on a single-monitor system, the PIP displays what your
main camera is sending to the far site. If the far site shows any type of content,
the content appears in the main part of the screen, and the PIP changes to show
the people at the far site.
During a call on a dual-monitor system, what you see on each monitor and in
the PIP depends on how the Polycom HDX system has been configured.
User's Guide for Polycom HDX Room Systems
1 Content big, far and near sites small
2 Content big, far site small
3 Content and far site same size
4 Content full screen
15