Specifying, Showing And Turning Off The Pip - Polycom QDX 6000 User Manual

1
2
3
4
© Polycom, Inc.
Far site big, near site small (only
available when your monitor is
configured to 16:9)
Far site displayed in full screen, and
near site in the right-bottom small
window (PIP layout, only available
when your monitor is configured to
4:3)
Content displayed in the left big
window, and far and near sites in the
right small window

Specifying, Showing and Turning Off the PIP

Your system can be configured to display a Picture-in-Picture (PIP) window
if your monitor is set to an aspect ratio of 4:3. You can show the PIP any time
the system is not sending or receiving content.
To specify whether and when to display the PIP:
Select System from the Place a Call screen.
Select User Settings from the System screen.
Select to see more settings.
Scroll to PIP, and select one of these settings:
Select this setting...
On
User's Guide for Polycom QDX 6000 Systems
To set the PIP...
Stays on for the duration of the call
9