Showing, Moving, And Turning Off The Pip - Polycom HDX Room Systems User Manual

Showing, Moving, and Turning Off the PIP

Polycom, Inc.
Polycom HDX 9006, Polycom HDX 8000 series and Polycom HDX 7000 series
systems with Hardware Version B, Polycom HDX 7000 series systems with
Hardware Version C, and Polycom HDX 6000 series systems will show only two
windows in Dual Monitor Emulation.
Your system may be configured to display a Picture-in-Picture (PIP) window.
During a call on a single-monitor system, the PIP displays what your main
camera is sending to the far site. If the far site shows any type of content, the
content appears in the main part of the screen, and the PIP changes to show the
people at the far site.
During a call on a dual-monitor system, what you see on each monitor and in
the PIP depends on how the Polycom HDX system has been configured.
To show, move, or turn off the PIP during a call:
• Press Display on the remote control to display the PIP on screen.
• While the PIP has a yellow border, press
it to different corners of the screen.
• After a brief pause, the PIP border turns blue. Then, press
turn the PIP off.
User's Guide for Polycom HDX Room Systems
1 Content big, far and near sites small
2 Content big, far site small
3 Content and far site same size
4 Content full screen
Display repeatedly to move
Display to
15