Showing, Moving, And Turning Off The Pip - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Showing, Moving, and Turning Off the PIP

10
VSX S
ERIES
During calls using Dual Monitor Emulation without content, you can press the
PIP button on the remote control to scroll through the following screen
layouts:
The last layout viewed is used for the next call.
Your system may be configured to display a Picture-in-Picture (PIP) window.
During a call on a single-monitor system, the PIP displays what your main
camera is sending to the far site. If the far site shows any type of content, the
content appears in the main part of the screen, and the PIP changes to show
the people at the far site.
During a call on a dual-monitor system, what you see on each monitor and in
the PIP depends on how the VSX system has been configured.
1. Near and far sites, same size, side by side
2. Far site big, near site small
3. Near site big, far site small
4. Near site, full screen
5. Far site, full screen
.
WWW
. /
POLYCOM COM VIDEODOCUMENTATION