Filter Sign Reset Setting; Display Setting - Fujitsu UTY-RVN*M Operating Manual

Remote controller (wired type)
Table of Contents

Advertisement

In "Submenu" screen, select [Filter sign] with the [Cursor but-
ton (Up/Down)], and press the [Enter button].
Submenu
[
1/2
]
Date and time
Screen
Filter sign
R.C. sensor control
Room temp. display
Back:
Setting:
Monitor
"Filter sign" screen is displayed.
Filter sign
Filter sign reset
Display
Back:
Setting:
Screen

5-4-1. Filter sign reset setting

If filter sign icon
is displayed on the "Monitor" screen,
clean the air filter on the relevant indoor unit first, and then
reset the filter sign as follows:
Note
Before resetting the filter sign on this remote controller,
clean the air filter on the relevant indoor unit by referring
the operating manual.
In the "Filter sign" screen, select [Filter sign reset] with
1
the [Cursor button (Up/Down)], and press the [Enter
button].
Filter sign
Filter sign reset
Display
Setting:
Back:
Screen
Following screen is displayed.
The filter sign will be reset. OK?
No
Mo 10:00
Off
Off
Mo 10:00
Off
Initial
Mo 10:00
On
Initial
Yes
Select [Yes] or [No] with the [Cursor button (Left/Right)],
2
and press the [Enter button].
When [Yes] is selected, the filter sign icon on the dis-
play is turned off.

5-4-2. Display setting

11
You can select [On] (display) or [Off] (non-display) for the filter
sign icon indication.
Note
When you set this setting to [Off], the filter sign icon
will not be displayed regardless of the necessity of filter
cleaning on the indoor unit.
In the "Filter sign" screen, select [Display] with the [Cur-
1
sor button (Up/Down)], and press the [Enter button].
Following screen is displayed.
Filter sign
Filter sign reset
Display
Back:
Setting:
Screen
Select [On] or [Off] with the [Cursor button (Up/Down)],
2
and press the [Enter button].
Filter sign
Filter sign reset
Display
Cancel:
Screen
When you set this setting to [On], and air filter cleaning on the
indoor unit is required, the icon is displayed on the "Monitor"
screen.
To check the function, press the [Enter button] and select the
icon.
Monitor
Filter sign
26
Cool
Menu
Mo 10:00
Off
Initial
Mo 10:00
On
OK:
Initial
Mo 10:00
° C
High
End:
En-20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents