Table of Contents
Advertisement
Additional functions
Setting the
start time
56
Delay start
The start time of a programme can be delayed, e.g. to benefit from
economy rates of electricity. A delay start time of between 1 minute
and 24 hours can be selected.
Delay start must be switched on in the Settings menu (see
"Settings , Delay start").
If Delay start has been switched off, it will not be visible when
additional functions are called up.
When using the Delay start function, make sure that the cleaning
agent compartment is dry before adding cleaning agent. Wipe dry
with a cloth if necessary.
If the compartment is wet, cleaning agent can become lumpy and
stick to the dispenser, with the result that it is not fully dispensed.
Switch the dishwasher on with the button.
Select the programme you require (see "Operation, Selecting a
programme"). The Start/Stop button's LED will flash.
Press the OK button.
Select
Delay start
Start time
-- : --
Use the arrow buttons (higher) and (lower) to set the hours and
minutes and confirm each entry using the OK button.
When you have entered the start time, press the Start/Stop button.
Universal
Temperature
Switch on at
The selected programme, along with the temperature and start time,
will then be displayed.
To cancel a set delay start before it has started, switch the
dishwasher off using the button.
and confirm your choice with the OK button.
G
55 °C
12:30
Advertisement
Table of Contents
