Additional Functions; Stop & Go; Recall - Miele DA 420V-6 Operating Instructions Manual

Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1.
The power levels set for the cooking
zones and the timer settings cannot be
changed; the cooktop can only be
switched off. The minute minder,
automatic switch-off, Booster and Auto
heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activating/Deactivating
 Touch the  sensor.
Use this function when the sensors
need to be cleaned quickly or there is a
risk of boiling over.

Additional functions

Recall

If the cooktop is switched off
inadvertently during operation, this
function can be used to reset all
settings. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
 Switch the cooktop on again.
 Immediately after switching the
cooktop on, touch one of the flashing
cooking zone indicators.
39