Daily Powering; Manual Powering; Automatic Switch Off/On; Forced Switch On - LaCimbali Q10 Use And Installation

"Before setting the machine at work, make sure
t at:
• the main electric power switch is on
• the mains water cock has been turned on

MANUAL POWERING

Set in action the main switch (23) to turn on the machine. The
following message will appear on the display (5)
10 March 2010
wednesday
CHECK BOILER
The preset working pressure must be reached before the
machine is ready for use.
If any dispensing key is pressed during this phase, the following
message will appear on the display
10 March 2010
wednesday
MACHINE COLD
PLEASE
AUTOMATIC SWITCH OFF
The machine can be set to switch off and switch on at
programmed times. Consult the "Service Time Menu" chapter
to set the "
im " switch-on time and the "
switch-off time.
hen a service time is set, the machine automatically switches
off at the programmed time. During the automatic switch-off
phase, the following message will appear on the display
10 March 2010
wednesday
MACHINE OFF
hen the machine is working in the automatic on/off
Note.
function do not use the general switch (23) to switch off the
machine. If this happens, the machine will not be able to switch
on again automatically.

7. Daily powering

;
".
15 15 04
15 15 04
AIT
im "
15 15 04
52
5
AUTOMATIC SWITCH ON
The machine switches on automatically at the programmed
timed. The messages displayed and the operations performed
by the machine are the same as those described in the para-
graph "MANUAL POWERING".

FORCED SWITCH ON

Press the key for a few seconds to force the machine on
again.
Note. Forcing the machine on does not change the pro-
grammed on/off times.
Note. At this point the machine will remain on until the next
switch off time is reached.
To immediately return the machine to "off" as originally
programmed, switch it off and on again using the general
on-off switch (23).
SLEEP MODE
ON and OFF functions can also be activated by manually
pressing the Sleep mode key
Keep the key (SM) pressed for a few seconds to enter the
Sleep mode. During this phase, the LED above the dispensing
nozzle remains lit and the dispensing keys alternatedly blink.
Keep the key (SM) pressed again for a few seconds to
exit the Sleep mode Mode and to return to the machine's
work phase.
23
SM
(SM).