Daily Switch-On; Heating Phase; Delivery Of The Coffee - LaCimbali M21 JUNIOR Owner's Manual

English
" Before using the machine make sure that:

- the main electricity supply ON/OFF switch is ON
- The water in the reservoir must be at the maximum
level.".
Switch on the mains switch (1); Led (12) "machine on" will flash.
If the water level in the boiler is below minimum, the "boiler level" (16)
lamp will light and the boiler will fill to the correct level (lamp 16 off).
At this point, the "Heating phase" starts, at the end of which led (12)
remains lit, indicating that the machine is ready to be used.
At the end of the working day, switch off the mains switch (1).
During heating, if one of the coffee dispensing switches (2) is pressed,
the machine dispenses a coffee at the temperature reached at the
time.
Heating is completed when the boiler gauge indicator (9) remains stable
in the green area.
The machine is now ready to dispense coffee, steam and hot water.
The heating phase is completed when the boiler manometer pointer
(14) is stabilized in the green area and led (23) remains lit.
At this point, the machine is ready to dispense coffee, steam and hot
water.
To ensure that the temperature of the group and that of the filter carrier
(7) is the same, press the coffee dispensing button (2) and dispense
water for a few seconds, then press the stop button (15) again.
Remove the filter carrier, empty the old coffee grounds and fill with 1 or
2 doses of ground coffee, according to the filter carrier capacity.
Level off the ground coffee using the doser-grinder press.
Remove any ground coffee residue from the edge of the filter.
Insert the filter carrier (7) into the group, ensuring it is well fastened in
place. Position the cup (or cups) under the spout (or spouts) of the filter
carrier (7).
Press the coffee button (2) to dispense coffee. Press the Stop button
(15) once the desired dose has been dispensed.

Daily Switch-On

Heating phase

Delivery of the coffee

16 12
2
4
7
2
7
English
1
15
14
9
15