Connecting The Machine To A Generic Fridge Module - LaCimbali Q10 Use And Installation

Please follow these steps to connect the MODULO Q10 MILK
+ CUP to the machine
1) insert the milk intake tube (40), from the machine, in
the manifold (C) positioned in the specific hole of the
MODULO Q10 MILK + CUP;
2) Place the module next to the machine as shown in the
figure. Make sure the manifold (C) is inserted in the side
hole of the machine;
3) Insert the intake tube (40) into the milk container;
4) Insert the milk container in the MODULO Q10 MILK +
CUP and close the door.
hen placing the MODULO Q10 MILK + CUP next
to the machine, make sure the control panel can be
opened.
The correct position is show below
Besides being able to connect the machine to the MODULO
Q10 MILK + CUP, it can also be used with a generic milk
cooler.
The position of the generic milk cooler is different from the
position of the MODULO Q10 MILK + CUP. For example, the
illustration here shows how to connect the machine to the milk
cooler positioned underneath the machine counter.
Note In this case, the milk intake tube (40) comes from the
machine base and not from the side as with the MODULO
Q10 MILK + CUP.
The installer connects the milk tube.
Connecting the Machine – Modulo Q10 Milk + Cup

Connecting the machine to a generic fridge module

1
40
2
4
57
C
3
40
40