LaCimbali Q10 Use And Installation page 67

10
S
11
Place ½ liter of cold water into a container and add a dose of liquid detergent (see product instructions).
•
ash the separte parts, removing any organic residue with a sponge.
•
Immerse all mixer parts in the solution (water
•
Remove all parts from the solution and rinse.
•
12
4
Reassemble the parts and attach the mixer to its base.
Note Take care when reattaching the mixer blade (4) to the pin (P), and make sure the two flat parts on the 2 components
match.
Note Take care when reattaching the mixer conveyor (3) to water nozzle (H).
13
After the machine has returned to its normal working conditions, simultaneously press the keys (26)
a second to perform a washing cycle.
Use a brush to clean all the holes where the liquid passes through and clean also
the silicon pipe (S) .
detergent) for at least 15 minutes.
P
65
H
and (28)
3
for at least