Key Menu - Cappuccino Selection; Key Menu - Milk Selection; Key Menu - Chocolate / Solubles Selection (Where Contemplated) - LaCimbali Q10 Use And Installation

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The following message will appear on the
display
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose
The following cappuccino selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time 0
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0
the milk dose);
Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose

19.4 Key menu - Chocolate / Solubles selection (where contemplated)

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows
KEY MENU
Type
repetition

19.2 Key menu - Cappuccino selection

+ u
1 cappuccino
001
07.0
07.0
u
00.0
60 seconds, with
time set in

19.3 Key menu - Milk selection

+ u
1 milk
001
07.0
07.0
u
00.0
+ u
1 chocolate
001
u
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds);
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1);
- grinder (chosen between grinder MM1 or MM2);
- coffee dose... (coffee dose grinde ...impulses, 0 ÷ 200 with
increments of 1);
- water start (determines if the water must be added (before)
or (a t ) the coffee dispensing);
- Additional water (volumetric dosage pulses, from 0 to 999,
with increments of 1).
The components - * - are applied only in some produit
configurations
The dose setting for both grinders has a field range of + 5 of
the value set in the technical programming menu.
ampl
technical programming
coffee dose MM1 045
coffee dose MM2 020
The following cappuccino selection parameters can be modi-
fied:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time 0
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds).
The following chocolate (or other soluble beverage) selection
parameters can be modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099).
81
customer programming
coffee dose MM1 040÷050
coffee dose MM2 015÷025
60 seconds, with
time set in