System Initialization - IDTECK Star iCON100SR User Manual

/ card confidential.
Beware that if you forget the Master ID, you cannot access the Setup Mode.
To change the Master ID, press <ENT>, and then either enter the desired 8Digit Master ID or
present a card to the reader.
For the iCON100SR, the Master ID is 10Digits long in the range of 0000000000 to
4294967295. For using the 2BYTE MODE of iCON100SR, the digit range becomes
0000000000 to 6553565535.
When the Master ID/card registration is successfully completed, the LCD displays the "REGIS
TRATION OK" message.
The default Master iCON100SR, it is 0000000000 (Ten zeros.)
1.7

System Initialization

System initialization allows you to initialize the iCON100. Initialization clears all the user-defi
ned data stored in the device such as card data, input/output setting, Time Schedules, etc.
Prior to system initialization, make sure to check whether or not the data stored in
the device is not needed, since it will be deleted after the initialization.
To initialize the iCON100, press <ENT>, and then press <1> to confirm. If you wish to cancel
Setup Menu F1 p.45