IDTECK Star iCON100SR User Manual page 16

erly followed one entry and one exit by the Anti-pass-back rule. APB only allowed exit
for the user once got into the door first and it doesn't allow any user trying twice entr
y or twice exit.
Data Retention
All user information and event/alarm data are retained even in the event of Power Fail
ure unless the memory or the device itself is damaged.
Keypad Registration
If Star iCON100/ IDTECK iCON100SR is not connected to host PC, the integrated keyp
ad and LCD display module can also be used for the entire programming process man
ually.
Input / Output
Star iCON100/ IDTECK iCON100SR has built-in 5 inputs and 4 outputs (2 relay output
s and 2 TTL outputs) which can be used to manipulate a wide variety of controls.
Time Schedule Setup
You can program 10 time schedules and apply one time schedule to each user. Each t
ime schedule has 8 different time zones from Monday to Sunday (7 time zones) and o
ne holiday. Each time zone has 5 different time codes so you can program 5 different
time codes to each day. Also you can program time schedule for individual inputs and
outputs. Note that the time schedule for input is activated time code for input device
so that the input is activated during the time code on this time schedule. Each time sc
hedule is linked to one of holiday schedule and this linked holiday only validates to hol
iday time code of the time schedule.
Holiday Schedule Setup
Excepting Sunday, you can program 32 holidays to one holiday schedule. Each holida
y schedule is linked to one time schedule which has time code for holidays. So you ca
n program all holidays to holiday schedule and the time code for holidays is program
med to holiday time zone of time schedule.
Example:
A. Holiday schedule 01 linked to time schedule 01,
Holiday schedule 02 linked to time schedule 02
B. Holiday schedule 01 linked to time schedule 01,
Holiday schedule 01 linked to time schedule 02
Forced Door Open Alarm
When door is opened by force, door contact sensor is activated then forced door ope
n alarm will be generated until the door is closed. For this application, you have to ins
p.10 PRODUCT OVERVIEW