Id Display; Buzzer Status; Data Byte (Icon100Sr Only) - IDTECK Star iCON100SR User Manual

For this application, a Door Contact Sensor must be installed on the door.
2.12

ID Display

ID DISPLAY allows you to decide whether to display the card number or the status message
on the LCD when access is granted or denied. To change the setting, press <ENT> and press
<4> or <6> to select "STATUS" or "CARD NO" and press <ENT> to confirm.
STATUS
The LCD will display the text message indicating the status, i.e. "ACCESS GRANTED" o
r "ACCESS DENIED"
CARD NO
Display the number of the card.
2.13

BUZZER STATUS

The buzzer generates a beep when a button on the keypad is pressed, when a card is read,
when an error occurs, etc.
To enable or disable the buzzer sound, press <ENT> and press <4> or <6> to select "ENABLE"
or "DISABLE" and press <ENT> to confirm.
The buzzer beeps regardless of this setting, when you exit the Setup Mode, when
a memory alarm is activated, or when Buzzer Output is defined in "In/Output Defin
e".
2.14

Data Byte (iCON100SR Only)

Setup Menu F2 p.57