Backup Battery Switch; System Initialization - IDTECK GE313 Operating Manual

5 .2 BACKUP BATTERY SWITCH

U
GE313 has a switch for the backup battery connection, which remains open circuit to prevent any current
consumption of the backup battery (Figure: Switch setting). Before the GE313 operation, it needs to be
connected so that the backup battery can retain the serial RTC(Date and Time data) during power failure.
Figure: SWITCH SETTING

5 .3 SYSTEM INITIALIZATION

U
After the all installation and connections are completed, press and hold the Initialize button and put the power
(+12V DC) to GE313. The LCD will first display "Initialize OK? 0:No 1:Yes". Press <1> key if you want to
initialize the system. After all Initialization process is completed, the system is operating on normal mode and
the LCD displays "GE Security, GE313 [F1], Date Time".
Figure: SWITCH LOCATION
16