System Initialization - IDTECK Star 505R Quick Installation Manual

※
505R/IP505R/SR505 QUICK INSTALLATION GUIDE

5.2 SYSTEM INITIALIZATION

You have to initialize the Star 505R unit prior to installation.
Once power is supplied to the Star 505R, press down the initialization switch on the back of the Star 505R unit and
then keep it more than 2 seconds, then you can see displays below on the LCD. If you want initialization, press key
<1> otherwise press key <0>.
SYSTEM INIT.
1 – YES, 0 - NO
○
INIT. OK !!!
○
○ 1 Press the key <1> if you wish to initialize the Star 505R.
○ 2 Initialization is processing
○ 3 Rebooted automatically after Initialization
1
3
Initialization Switch
Figure: The Position of Initialization Switch
WAITING !!!
○
2
11