Panasonic KX-TD500 Programming Manual page 33

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Type
CO
1.
CO
2.
EXT
3.
Qsig – Master
4.
Qsig – Slave
Specifies the type of each BRI port on a BRI port basis.
Note
• When you change the programming data, the status of the
card must be made OUS (Out-of-Service), and then INS (In-
Service).
• 2.1 ISDN Features (F/G)
– Integrated Services Digital Network (ISDN)
– Integrated Services Digital Network (ISDN) Extension
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 4.7 ISDN Extension Line (P/G)
DN
Blank
3-4 digits consisting of 0-9 or X
Specifies the DN (Directory Number) for the BRI port.
(Assignable only when "EXT" is specified in "Type" assignment.)
Note
• "X" can be used as a wild card character which substitutes
any digit in its position. The last one or two digits of DN may
be "X."
• 2.3 Numbering Plan (P/G)
Configuration
33