Auto Start Time; Inter-Tenant Calling (1 - 8); Day (Sun-Sat); Night (Sun-Sat) - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference

(Auto Start Time)

Specifies "Start" time of DAY / NIGHT / LUNCH / BREAK service on a day of the week
basis.
(This setting is valid when "Auto mode" is selected in "DAY / NIGHT Switching Mode"
setting.)
Up to four time frames (Day, Night, Lunch-Start, Lunch-End, Break-Start, Break-End) can be
set up on each day of the week.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Inter-tenant Calling (1 - 8)

No check
1.
No check [Disallowed]
2.
Check [Allowed]
Specifies other tenant numbers to which extensions in this tenant
can make a call.
If no tenant numbers are checked in this field, extension users
within this tenant cannot make a call to extensions in other tenants.
Making calls from one tenant to another is not allowed by default.
• 1.3 System Features (F/G)
– Tenant Service

Day (SUN-SAT)

9:00 AM
1.
Disable
2.
12:00-11:59 PM / AM
Specifies the start time for Day Service.
• 1.3 System Features (F/G)
– Night Service

Night (SUN-SAT)

5:00 PM
Same as Day
Specifies the start time for Night Service.
• 1.3 System Features (F/G)
– Night Service
System
43