Trunk Hunting Mode; Card Codec; Net Codec - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

28. Trunk hunting mode

Forced
1.
Forced
2.
Loop Detection
Specifies the trunk hunting mode.
1.
Forced:
The system seizes a trunk line whether or not loop current is
detected from the local CO.
2.
Loop Detection:
The system seizes a trunk line after detecting loop current from
the local CO.
• 3.2 Trunk Group (P/G)

29. Card CODEC

Mu Law
1.
Mu Law
2.
A Law
Specifies the PCM (Pulse Code Modulation) conversion mode of
KX-T96xxx series trunk and extension cards.
Note
• This setting is required only when XMX (for Mexico) type
KX-T96xxx series trunk and extension cards are installed in
the system. In this case, select "A Law."
None

30. Net CODEC

Mu Law: [HK], A Law: Others
1.
Mu Law
2.
A Law
Specifies the type of PCM (Pulse Code Modulation) conversion
mode compatible with the Digital Network to which the system is
connected.
Note
• The change of this parameter is activated after resetting the
system.
None
System
105