Leading Digit - Panasonic KX-TD500 Programming Manual

Private Network
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
304

Leading Digit

Blank
Up to 3 digits consisting of 0-9 or X
Specifies the leading one, two or three digits of the number for TIE
calls. Used to determine the trunk group for routing a TIE call.
Note
• "X" can be used as a wild card character which substitutes
any digit in its position.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Digits to delete
0
0-16
Specifies the number of digits to be deleted from the dialled digits.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Number to be added
Blank
Up to 20 digits consisting of 0-9
Specifies the dialling number to be added to the dialled digits.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Trunk Group No.
None
None, 1-48
Specifies the trunk group hunt sequence to be used when placing a
TIE call.
The sequence is commonly used by all tenants but trunk group will
be skipped if it does not belong to the same tenant as the caller.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Programming Guide