[Voice Mail Command] Get Message; [Voice Mail Command] Aa Service; [Voice Mail Command] Vm Service - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

[Voice Mail Command] Get Message

*H
Up to 16 digits consisting of 0-9, , # or H
Specifies the Get Message command.
This command is transmitted to a VM port when the message
receiver presses the MESSAGE button to retrieve a voice message.
• 1.3 System Features (F/G)
– Integration, VPS

[Voice Mail Command] AA Service

#8
Up to 16 digits consisting of 0-9, , # or H
Specifies the AA (Automated Attendant) Service command.
If AA Service is set to "Start" by System Programming, this
command is sent to a VM port when an incoming CO call is
answered by the VM port.
• 1.3 System Features (F/G)
– Integration, VPS

[Voice Mail Command] VM Service

#6
Up to 16 digits consisting of 0-9, , # or H
Specifies the VM (Voice Mail) Service command.
This command is transmitted preceding the "Get Message"
command above. This is effective to switch to a VM port when an
AA port lights the MESSAGE indicator.
This command is also transmitted preceding the "Leave Message"
command when Operator transfers a call to an extension and then
it is forwarded to an AA port so that the AA port can be switched
to VM port temporarily.
• 1.3 System Features (F/G)
– Integration, VPS
Features
263