Flash Time; Disconnecting Time - Panasonic KX-TD500 Programming Manual

Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
128

Flash Time

80 ms: [SA], 600 ms: Others
1.
None
2.
80 ms
3.
300 ms
4.
600 ms
5.
900 ms
6.
1200 ms
Specifies the length of flash time.
Notes
• When you need finer resolution, assign this to 80 ms and use
"Flash Time" parameter in "1-1 Slot Assignment - Card
Properties (XXX: ELCOT)" screen.
• You must use "Flash Time" parameter in "1-1 Slot
Assignment - Card Properties (XXX: ELCOT)" screen when
your Central Office requires a Flash Time not listed here.
• For information on "Card Properties" screen, please refer to
"Card Type" in Section "1.2 Slot Assignment."
None

Disconnecting Time

1.5 s
1.
0.5 s
2.
1.5 s
3.
2.0 s
4.
4.0 s
5.
12.0 s
Specifies the maximum time in seconds the system is to wait after
releasing the trunk line before getting it again.
Note
• This allows the Central Office an opportunity to release its
resources before another trunk call is placed from the PBX.
None
Programming Guide