Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Collect Call
Enable
1.
Enable
2.
Disable
Specifies whether to enable or disable receiving the collect calls via
this trunk line.
(Assignable only when E1 [DR2] / ELCOT / LCOT / RCOT /
PCOT / DID / DID-2W / DID-MFC card is installed in the system.)
None
Wink Signal Time-out
1024 ms
1.
64 ms
2.
128 ms
3.
256 ms
4.
512 ms
5.
1024 ms
6.
2048 ms
7.
4096 ms
8.
8128 ms
Specifies the length of time in milliseconds that the system is to
wait for the Wink Signal after seizing the trunk.
(Assignable only when "Start Signal Type" is set to "Wink"; the
case of the E&M card is excluded.)
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Line
177