Panasonic KX-TD500 Programming Manual page 160

Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
160
[Operator Setting] Call Priority
CO Call:1, Intercept Routing:2, Recall:3, Extension Call:4
Priority 1-4
Specifies the answering priority of incoming calls to the Operator
Group by a type of call when more than one call is ringing at an
Operator extension.
(Assignable only when "Operator" is specified in "Group Type"
programming.)
Notes
• If all extensions in the Operator group are busy, incoming
calls directed to the group will be put in the waiting queue in
order of precedence determined by this Call Priority setting.
• If the same priority is set on all four types of calls, the calls
will be put in the waiting queue in order of the arrival.
• 1.3 System Features (F/G)
– Operator Group
• 1.6 Originating Features (F/G)
– Operator Call
[Operator Setting] Ringing Type
Single
1.
Multi
2.
Single
Specifies whether the calls coming in on an Operator Group ring
one Operator (Single) or all Operators in the group (Multi)
simultaneously.
(Assignable only when "Operator" is specified in "Group Type"
programming.)
• 1.3 System Features (F/G)
– Operator Group
• 1.6 Originating Features (F/G)
– Operator Call
Programming Guide