Start Signal Type; Answer Wait Timer - Panasonic KX-TD500 Programming Manual

Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
178

Start Signal Type

Wink
1.
Immediate
2.
Wink
Specifies the start signal type for a DID trunk and a TIE (E&M)
trunk.
1.
Immediate:
The system sends the dialling digits to CO after waiting for the
time length determined by "First Dial Timer" in "Card
Properties" screen of the corresponding trunk card.
For information on "Card Properties" screen, please refer to
"Card Type" in Section "1.2 Slot Assignment."
2.
Wink:
The system sends the dialling digits to CO after receiving the
wink signal.
• 3.1 TIE Line Features (F/G)
– TIE Line Service

Answer Wait Timer

None
1.
None
2.
1 min
3.
2 min
4.
3 min
5.
4 min
Specifies the length of time in minutes the system waits, after an
outgoing CO call is made, before the other party answers the call.
If the call is not answered before this timer expires, the call will be
disconnected automatically.
(Assignable only when E1 / ELCOT / RCOT / T1 [TIE / DID] /
DID-2W / DID-MFC / BRI / PRI23 / PRI30 card is installed in the
system.)
None
Programming Guide