Panasonic KX-TD500 Programming Manual page 210

Line
<Key Type Assignment>
The following Key Type Assignment screen is displayed by clicking "Key Type Display"
button (including "Not Stored") for each DSS Key on the above screen.
<Additional Parameters Required by Key Type>
Depending on a Key Type, additional parameters are required as follows.
Key Type
SINGLE-CO
GROUP-CO
DSS
ONE-TOUCH Dial
G-FWD
VTR
2WAY-REC
2WAY-TRN
210
Additional
Parameters
Trunk Line Specifies the trunk port physical number (10101 to 31416).
No.
Trunk Group Specifies the Trunk Group number (01 - 48).
No.
EXT. Specifies the extension number (3 or 4 digits).
Specifies the telephone number or feature access number (up
to 24 digits consisting of 0 - 9, , #, -, P, S or F).
Note
• P: Pause, S: Secret Dialling, F: Hook Flash
DN Specifies the Floating Directory Number of the Incoming
Group.
DN Specifies the Directory Number of the Voice Mail extension.
DN Specifies the Directory Number of the Voice Mail extension.
DN Specifies the Directory Number of the Voice Mail extension.
Description
Programming Guide