Name; Incoming Type - Panasonic KX-TD500 Programming Manual

Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
172

Name

CO001-CO192
Up to 10 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ % ( ) + , - / : ; < = > ? @ &.
Specifies the name for the trunk line.
Note
• This is shown on a display PT when receiving a call using
this trunk.
• 1.17 Display Features (F/G)
– Display, Call Information

Incoming Type

(1)DIL: ELCOT / GCOT / LCOT / PCOT / RCOT / T1 [GCO] / T1
[LCO] card (2)DID: DID / DID-2W / DID-MFC / E1 [DR2] / E1
[E&M-C (MFC-R2)] / E1 [E&M-P (MFC-R2)] / T1 [DID] card
(3)TIE: E1 [E& M-C (Pulse, DTMF)] / E1 [E&M-P (Pulse,
DTMF)] / E&M / T1 [TIE] card (4)DDI: BRI / PRI23 / PRI30 card
1.
DIL
2.
DID
3.
TIE
4.
DDI
5.
MSN
Specifies how the incoming CO call via this trunk line is routed to
the destination in the system.
1.
DIL:
Incoming CO calls are routed by DIL (Direct In Lines) 1:1 or
1:N feature.
2.
DID:
Incoming CO calls are routed by DID (Direct Inward Dialling)
feature.
3.
TIE:
Incoming CO calls are routed by TIE Line feature.
4.
DDI:
Incoming CO calls are routed by ISDN DDI (Direct Dialling In)
feature.
5.
MSN:
Incoming CO calls are routed by ISDN MSN (Multiple
Subscriber Number) feature.
Programming Guide