Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[TIE Line] Type
4 wires
1.
2 wires
2.
4 wires
Specifies the voice path type of TIE Lines.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
[TIE Line] Sensitivity - IN EXT
0 dB
- 3 to +6 dB in 3 dB increments
Specifies the voice level for reception.
Note
• When this setting is specified in a CO-to-CO and an
Extension-to-CO speech path respectively, the LPR software
version of the E&M card must be set to "2" or later. If the
LPR software version of the E&M card is less than "1," the
setting for a CO-to-CO speech path always works.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
[TIE Line] Sensitivity - IN CO
0 dB
- 3 to +6 dB in 3 dB increments
Specifies the voice level for reception.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
[TIE Line] Sensitivity - OUT EXT
0 dB
- 3 to +6 dB in 3 dB increments
Specifies the voice level for transmission.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Line
181