Pause Timing Before Sending Dtmf Signal (Rbt, Bt); Turn Off Control Of Message Waiting Lamp; Start Aa Service After Fwd, Irna Of Co Call - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Pause timing before sending DTMF signal (RBT, BT)

1.5 s
1.
0.5 s
2.
1.0 s
3.
1.5 s
4.
2.0 s
Specifies the length of time in seconds the system is to wait before
sending Integration Code with DTMF signals (System- Voice
Mail, Extension Status).
• 1.3 System Features (F/G)
– Integration, VPS

Turn off control of Message Waiting lamp

System
1.
System
2.
Voice Mail
Specifies whether the system or the Voice Mail port turns off the
Message Waiting lamp after the extension user retrieved a message
recorded in his mailbox.
• 1.3 System Features (F/G)
– Integration, VPS
• 1.17 Display Features (F/G)
– Message Waiting

Start AA service after FWD, IRNA of CO call

Do not start
1.
Do not start
2.
Start
Specifies whether the system starts the AA (Automated Attendant)
Service or not when a CO call is directed to Voice Mail port by Call
Forwarding or Intercept Routing.
If "Start" is specified, "AA Service Code" is transmitted to the VM
port and the VM service does not work.
• 1.3 System Features (F/G)
– Integration, VPS
Features
265