Panasonic KX-TD500 Programming Manual page 237

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[CLIP / COLP Number] Private
Blank
Up to 16 digits consisting of 0-9,
Specifies a CLIP/COLP or ANI (Automatic Number Indication)
number used for the incoming / outgoing calls via Private Network
to each PC Console.
Notes
• The KX-TD500 System is designed and manufactured in
accordance with the following ETS (European
Telecommunication Standard) specifications: ETS 300 122
Generic Keyboard protocol for the support of
supplementary services.
• Specify the registered Central Office calling number for
correct operation of CLIP and COLP.
• 2.2 ISDN Originating Features (F/G)
– Calling Line Identification Presentation (CLIP)
• 2.3 ISDN Answering Features (F/G)
– Connected Line Identification Presentation (COLP)
• 3.3 Network Service Features (F/G)
– Calling Line Identification Presentation (CLIP)
– Connected Line Identification Presentation (COLP)
• 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
[Call Log Incoming] Overwrite Mode
Yes
1.
Yes
2.
No
Enables or disables Call Log Incoming, Overwrite Mode.
If the Call Log is full (30 call records are already logged) when a
new Caller ID call comes in.
1.
Yes: The new call record overwrites the oldest one in the Call
Log.
2.
No: The new call record is not logged.
• 2.10.1 Calling Using the Call Log (Incoming Call Log) [KX-
T7533, KX-T7536, KX-T7230, KX-T7235 only] (U/M)
or #
Line
237