Panasonic KX-TD500 Programming Manual page 23

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[Ext No.2] DN
Blank
3-4 digits consisting of 0-9
Specifies the extension for B2 channel.
Notes
• This programme allows you to assign an extension number
to each Voice Mail port. Since each port connected to the
VPS provides two extensions, this enables you to assign
extension numbers to each port. To reach the Voice Mail
system, users dial these extension numbers.
• When you swap DN you already programmed among Jacks,
you must clear these DNs once.
• 2.3 Numbering Plan (P/G)
[Ext No.2] Group No.
Blank
1-128
Specifies the Extension Group (1-128) to which the B2 channel of
the VPS (DPT) port is assigned.
Note
• Specifies the extension group (1-128) to which the type of
extension group, VM or AA, is assigned.
• 1.3 System Features (F/G)
– Extension Group
• 3.3 Extension Group (P/G)
Status
—
1.
INS
2.
OUS
3.
FAULT
Specifies the operating status of the VPS (DPT) port.
1.
INS: The VPS port is In-Service.
2.
OUS: The VPS port is Out-of-Service.
3.
FAULT: The VPS port is defective.
None
Configuration
23