Features
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
254
Mode
Disable
1.
Enable
2.
Disable
Specifies whether Waiting Second Dial Tone mode is enabled or
not.
Note
• In some areas, upon completion of area code entry, the
extension user must ensure the reception of the second dial
tone from the Central Office before dialling the office code
and the subscriber number. In this case, this mode should be
enabled.
None
[Waiting Second Dial Tone Code] Dial
All: Blank
Up to 4 digits consisting of 0-9 or X
Specifies 1-4 digits facility access code required by the Central
Office.
Note
• "X" can be used as a wild card character which substitutes
any digit in its position.
None
[Waiting Second Dial Tone Code] Pause
None
1.
None
2.
1-4
Specifies the pause time length (fixed dialling delay) required to
ensure the reception of CO dial tone. One pause time length (1.5-
4.5 s) is determined by "Pause Time" setting in "3-1 Trunk Group"
screen (Section "3.2 Trunk Group.")
None
Programming Guide