System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
110
43. LCD Time Display Mode
12h
1.
12h
2.
24h
Specifies the time display on the LCD in 12-hour or 24-hour
notation.
• 1.17 Display Features (F/G)
– Display, Date and Time
44. Hotel Application
Disable
1.
Enable
2.
Disable
If enabled, the Manager and the Operators can handle "Front /
Operator services" such as "Check-in / Check-out."
• 1.3 System Features (F/G)
– Hotel Application
45. Flash Signal before CO Disconnect
Disable
1.
Enable
2.
Disable
Specifies whether or not the system sends the FLASH signal to the
Central Office after the CO call is terminated. (Used to receive pay
tones after the termination of the call.)
None
46. Date Display
M / D / Y
1.
M / D / Y
2.
D / M / Y
Specifies a date display format appropriate to your area.
• 1.17 Display Features (F/G)
– Display, Date and Time
Programming Guide