Extension-To-Co Line Call Duration Time; Co-To-Co Line Call Duration Time; Automatic Redial Interval Time - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Extension-to-CO Line Call Duration Time

10 min
1-64 min
Specifies the maximum time allowed for a call with an outside
party.
This time limit can apply to outgoing CO calls only or both
outgoing and incoming CO calls. This is determined by "5. Limited
call duration" setting in Section "2.8 System Option."
Note
• This timer applies to the extension user who is restricted by
"Time Limit of Outside Calls" setting in Section "2.4 Class
of Service (COS)."
None

CO-to-CO Line Call Duration Time

10 min
1-64 min
Specifies the maximum time allowed for a call between two outside
parties (CO-to-CO line call).
If this timer expires during a CO-to-CO line call, it will be
disconnected.
• 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
• 1.11 Transferring Features (F/G)
– Call Forwarding
– Call Transfer
• 2.8 System Option (P/G)
– TIE-CO/CO-TIE Line Call Duration Restriction

Automatic Redial Interval Time

60 s
30-1200 s
Specifies the interval time between each Automatic Redial attempt.
• 1.7 Dialling Features (F/G)
– Redial, Automatic
System
83