T1 Port Assignment - Panasonic KX-TD500 Programming Manual

1.6 T1 Port Assignment

Used to assign parameters for T1 ports.
How to set up a T1 card
1. Insert T1 card into a free slot.
Notes
2. Assign the card type of the slot to "T1" in "1-1 Slot Assignment" screen.
3. Assign the channel type and the trunk group number of each port in "1-5 T1 Port
Assignment" screen. Assign the directory number and the extension group number
when the channel type is assigned to "OPX."
Note
4. When the channel type of the port is assigned to a trunk line (LCO, GCO, DID or
TIE[E&M]), assign the parameters of the port like usual trunk line in "4-1 Trunk
Line" screen. When the channel type is assigned to "OPX," assign the parameters
of the port like usual extension line in "4-2 Extension Line" screen.
5. Change the card status to "INS (In-Service)" in "1-1 Slot Assignment" screen. All
the ports are changed to "INS (In-Service)" status automatically.
Programming Guide
• T1 card should be installed in the free slot no. 1, 5 or 9 of each shelf.
• The next slot must be empty.
• The channel type should be assigned on the basis of the contract with a
telephone exchange.
Configuration
25