Program pack-
ages
Sort programs
Moving programs
Program color al-
location
Hygiene
Expert code
The selection of programs can be expanded by activating single
programs from the target group program packages.
The programs selected from the program packages (marked in or-
ange) are displayed under program selection.
Programs can be moved within the program list and in the Favorites
list.
Factory default: Off
Touch the selection area for the program you want to move.
Press and hold the selection area until the frame changes.
Drag the program to the required place.
You can assign a color to a Favorite program. In the list of Favorites,
each Favorite program is given a colored frame, which can be ad-
justed.
Factory default: On
If a program at a temperature below 140°F (60°C) has been used, a
request to start the
the display.
Factory default: Off
A code has to be entered to cancel a disinfection program. The code
can be modified.
The code is: 0 0 0
Make a note of your new code if you ever change it.
Maintenance Wash Hygiene
Supervisor level
program appears in
57