Program Cancellation With Manual Disinfection - Miele PLW 8615 Operating Instructions Manual

Operation
Program cancel-
lation with manual
disinfection
Manual program
cancellation
Program cancella-
tion due to fault
Manual disinfection
52
For programs with the
additional steps may be necessary for program cancellation. If there
has been no thermal disinfection, the wash water must be decon-
taminated manually.
During the first program phase:
Press the  button and confirm the confirmation prompt

program? Yes
with
The fault message Program aborted by user
There is wash water in the wash cabinet; it is not drained.
If the program is canceled due to a fault during the initial program
phase, the wash water is not drained. The required steps are de-
scribed under "Manual disinfection".
Press OK to acknowledge the fault message in the list.

Press OK to acknowledge the program cancellation.

Please unload
The message
play.
Open the door on the infeed side.

Decontaminate the wash water by adding disinfecting agent.

Close the infeed side door.

Select the load carrier.

Select and start the

grams assigned to the load carrier.
The wash water is drained; another fault message is displayed.
Press OK to acknowledge the fault message in the list.

The infeed side door can be opened.
Drainage after disinfection
.
appears in the program sequence dis-
Manual disinfection
parameter activated,
is displayed.
program from the list of pro-
Cancel