7” in-vehicle panel pc with touchscreen,
intel atom? processor e3826, obd-ii, gps, usb 2.0/3.0, hdmi, rs-232/422/485, rohs compliant, ip 54 front panel (108 pages)
Stainless panel pc with intel core i5-6300u / celeron 3955u cpu, touchscreen, usb 2.0, dual gbe lan, rs-232/422/485, ip 69k front panel and rohs (92 pages)
7" medical panel pc with intel celeron processor n6210, p-cap touchscreen, 8 gb lpddr4x, 32gb emmc, hdmi output, six usb 3.2, wi-fi 6, dual gbe, speaker and rohs (80 pages)
8" panel pc with intel® celeron® processor n6210 (72 pages)
Summary of Contents for IEI Technology IOVU-xxF-AD
Page 1
IOVU-xxF-AD RISC-based Panel PC MODEL: IOVU-xxF-AD 12”/15”/17” RISC-Based Panel PC with Touchscreen, Freescale™ i.MX6 Cortex™-A9 Quad-Core CPU, CAN 2.0, Android 4.2.2 OS, Wi-Fi, Bluetooth, PoE, RoHS Compliant User Manual Page i Rev. 1.00 – December 4, 2015...
Page 2
IOVU-xxF-AD RISC-based Panel PC Revision Date Version Changes December 4, 2015 1.00 Initial release Page ii...
Page 3
IOVU-xxF-AD RISC-based Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4
IOVU-xxF-AD RISC-based Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
IOVU-xxF-AD RISC-based Panel PC Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 M ....................2 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 F ......................4 RONT ANEL 1.5 R ....................... 4 ANEL 1.6 I/O I ......................
Page 6
3.5.4.2 RS-232/422/485 Serial Interface Pinouts (COM 2)........31 3.5.5 USB 2.0 Host Connectors ................31 3.6 S ................... 31 YSTEM AINTENANCE 4 USING THE IOVU-XXF-AD..................32 4.1 P ................... 33 OWER ROCEDURE 4.1.1 Installation Checklist ..................33 4.1.2 Power-on Procedure ..................33 4.1.3 Power-off Procedure ..................
Page 7
IOVU-xxF-AD RISC-based Panel PC 5.1 P ..............58 ERIPHERAL NTERFACE ONNECTORS 5.2 I ..............59 NTERNAL ERIPHERAL ONNECTORS 5.2.1 12”/15” LCD Connector (12_15_CN1) ............60 5.2.2 17” LCD Connector (17_21_24_CN).............. 60 5.2.3 Backlight Inverter Connector (CN6) ............... 61 5.2.4 Install OS Switch (SW3)................... 61 5.2.5 JATG Interface for Wi-Fi &...
Page 8
IOVU-xxF-AD RISC-based Panel PC List of Figures Figure 1-1: IOVU-xxF-AD Panel PC ....................2 Figure 1-2: Front Panel ........................4 Figure 1-3: Rear Panel........................4 Figure 1-4: IO Interfaces ........................5 Figure 1-5: IOVU-12F-AD Dimensions (unit: mm) ...............8 Figure 1-6: IOVU-15F-AD Dimensions (unit: mm) ...............9 Figure 1-7: IOVU-17F-AD Dimensions (unit: mm) ..............10...
Page 9
IOVU-xxF-AD RISC-based Panel PC Figure 4-8: Move and Trash Item on Home Screen..............38 Figure 4-9: Navigation Buttons ....................39 Figure 4-10: Status Bar ........................40 Figure 4-11: Status Bar – Setting Shortcut ................40 Figure 4-12: Status Bar – Notification ..................41 Figure 4-13: Wireless and Networks Settings ................42 Figure 4-14: More Settings Menu ....................43...
1.1 Overview Figure 1-1: IOVU-xxF-AD Panel PC The IOVU-xxF-AD is a 12”/15”/17” RISC-based panel PC with Android 4.2.2 OS. At the heart of the system is the Freescale™ i.MX6 Cortex™-A9 quad-core processor, offering low power in a powerful package. The IOVU-xxF-AD provides rich input capabilities utilizing the projected capacitive touchscreen.
IOVU-xxF-AD RISC-based Panel PC 1.3 Features The IOVU-xxF-AD features the following: Freescale™ i.MX6 Cortex™-A9 quad-core processor On-board 2 GB DDR3 memory Android 4.2.2 OS Projected capacitive touchscreen 12 V ~ 36 V wide range DC power input Equips with Wi-Fi 802.11b/g/n and Bluetooth capabilities One 10/100/1000 Mbps PoE port (supports 802.3at compliant PoE function)
IOVU-xxF-AD RISC-based Panel PC 1.4 Front Panel The front side of the IOVU-xxF-AD is a flat-bezel LCD screen surrounded by the aluminum frame. Figure 1-2: Front Panel 1.5 Rear Panel The rear panel has four VESA 100 mounting screw holes and two 3 W speakers.
IOVU-xxF-AD RISC-based Panel PC 1.6 I/O Interfaces The IOVU-xxF-AD contains the I/O interfaces as shown in Figure 1-4. Figure 1-4: IO Interfaces NOTE: For the IOVU-17F-AD model, when a LAN cable is connected to the 10/100/1000 Mbps PoE port, the two USB 2.0 ports will be disabled due to power consumption limitation.
IOVU-xxF-AD RISC-based Panel PC 1.7 System Specifications The IOVU-xxF-AD technical specifications are listed in Table 1-2. IOVU-12F-AD IOVU-15F-AD IOVU-17F-AD LCD Size 12” (4:3) 15” (4:3) 17” (4:3) Max. Resolution (W x H) 1024 x 768 1024 x 768 1280 x 1024...
IOVU-xxF-AD RISC-based Panel PC IOVU-12F-AD IOVU-15F-AD IOVU-17F-AD Thermal Solution Fanless Construction Material Aluminum front cover and sheet metal rear cover Color Black Operating Temperature -20ºC ~ 60ºC Storage Temperature -30ºC ~ 70ºC Humidity 5% ~ 90%, non-condensing IP Level IP 65 compliant front panel...
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IOVU-xxF-AD was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.
IOVU-xxF-AD RISC-based Panel PC The IOVU-xxF-AD is shipped with the following components: Quantity Item Image IOVU-xxF-AD RISC-based panel PC User manual and utility CD Table 2-1: Packing List 2.2 Optional Items The following are optional components which may be separately purchased:...
Page 24
IOVU-xxF-AD RISC-based Panel PC Item Image Arm (for IOVU-12F-AD only) (P/N: ARM-11-RS) Arm (for IOVU-15F-AD/IOVU-17F-AD only) (P/N: ARM-31-RS) Stand (for IOVU-12F-AD only) (P/N: STAND-A12-RS) Stand (for IOVU-15F-AD only) (P/N: STAND-A19-RS) Stand (for IOVU-15F-AD only) (P/N: STAND-B19-RS) Stand (for IOVU-17F-AD only)
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-xxF-AD. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IOVU-xxF-AD is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Remove the retention screws on the rear cover (Figure 3-1). Step 1: Figure 3-1: Retention Screws on the Rear Cover Gently lift the rear cover out of the IOVU-xxF-AD. Step 2: Locate the microSD card slot (Figure 3-2). Step 3: Insert the microSD card into the slot (Figure 3-2).
Stand mounting The four mounting methods are described below. 3.4.1 Wall Mounting To mount the IOVU-xxF-AD onto the wall, please follow the steps below. Select the location on the wall for the wall-mounting bracket. Step 1: Carefully mark the locations of the four screw holes in the bracket on the wall.
Insert the four monitor mounting screws provided in the wall mounting kit into the Step 6: four screw holes on the real panel of the IOVU-xxF-AD and tighten until the screw shank is secured against the rear panel (Figure 3-4).
IOVU-xxF-AD RISC-based Panel PC Figure 3-4: Chassis Support Screws Secure the panel PC by fastening the retention screw of the wall-mounting Step 9: bracket (Figure 3-5). Figure 3-5: Secure the IOVU-xxF-AD Page 21...
IOVU-xxF-AD RISC-based Panel PC 3.4.2 Panel Mounting To mount the IOVU-xxF-AD panel PC into a panel, please follow the steps below. Select the position on the panel to mount the IOVU-xxF-AD. Step 1: Cut out a section of the panel that corresponds to the rear panel dimensions of Step 2: the IOVU-xxF-AD.
IOVU-xxF-AD RISC-based Panel PC Figure 3-8: IOVU-17F-AD Panel Cutout Dimensions Slide the IOVU-xxF-AD through the hole until the aluminum frame is flush Step 3: against the panel. Install the mounting brackets onto the rear panel (Figure 3-9). The user has to Step 4: install nine mounting brackets and clamps to the IOVU-xxF-AD.
3.4.3 Arm Mounting The IOVU-xxF-AD is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 100 mm interface pad. To mount the IOVU-xxF-AD on an arm, please follow the steps below. The arm is a separately purchased item. Please correctly mount the arm onto Step 1: the surface it uses as a base.
Step 3: IOVU-xxF-AD, as shown in Figure 3-11. Figure 3-11: Arm Mounting Retention Screw Holes Secure the IOVU-xxF-AD to the interface pad by inserting four retention screws Step 4: through the bottom of the mounting arm interface pad and into the IOVU-xxF-AD.
The IOVU-xxF-AD has Video Electronics Standards Association (VESA) standard mounting holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA hole pattern. To mount the IOVU-xxF-AD onto a stand, please follow the steps below. Line up the threaded holes on the system rear panel with the screw holes on the Step 1: monitor stand mounting plate.
IOVU-xxF-AD RISC-based Panel PC 3.5 External I/O Connectors This section provides an overview of the external I/O connectors of the IOVU-xxF-AD. 3.5.1 10-pin I/O Connector The 10-pin I/O connector on the bottom panel (Figure 1-4) supports the following external peripheral devices: 1 x CAN 2.0...
IOVU-xxF-AD RISC-based Panel PC 3.5.2 DC Power Input Interfaces The IOVU-xxF-AD equips with two types of 12 V ~ 36 V DC power input connector. The locations of the power connectors are shown below. Figure 3-15: 12 V ~ 36 V DC Power Input Connector Locations The pinouts for the power terminal block are listed in the figure and table below.
IOVU-xxF-AD RISC-based Panel PC 3.5.3 10/100/1000 Mbps PoE Connector NOTE: For the IOVU-17F-AD model, when a LAN cable is connected to the 10/100/1000 Mbps PoE port, the two USB 2.0 ports will be disabled due to power consumption limitation. There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to an external network.
Yellow Flashing: Activity Table 3-4: RJ-45 Connector LEDs 3.5.4 Serial Interfaces The IOVU-xxF-AD has an RS-232 and an RS-232/422/485 serial port connector. 3.5.4.1 RS-232 Serial Interface Pinouts (COM 1) Pinouts for the RS-232 serial port are shown below. Description RS232_DCD1...
DM2- Table 3-7: USB 2.0 Host Connector Pinouts 3.6 System Maintenance If the components of the IOVU-xxF-AD fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. NOTE: A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced.
All peripheral devices (microSD card, serial communications devices etc.) are connected The system is securely mounted if required The power cables are plugged in 4.1.2 Power-on Procedure To power-on the IOVU-xxF-AD, just press the power switch to turn on the system. Figure 4-1: Power Switch Page 33...
IOVU-xxF-AD RISC-based Panel PC 4.1.3 Power-off Procedure To power-off the IOVU-xxF-AD, please follow the steps below: Press and hold the power switch until the screen in Figure 4-2 appears. Step 1: Tap Power off. Figure 4-2: Power-off Menu A message window prompts as shown in Figure 4-3. Click OK to turn off the Step 2: system.
IOVU-xxF-AD RISC-based Panel PC 4.2 Home Screen The IOVU-xxF-AD has multiple home screens, allowing users to customize the screen with widgets, apps, folders and shortcuts. The following sections describe the basic technique to manage the home screen. 4.2.1 Switching between Home Screens Swipe left or right to switch between home screens.
IOVU-xxF-AD RISC-based Panel PC Figure 4-5: Launcher Button Long press an app icon or a widget (click the WIDGETS tab to access the Step 2: widgets page). When it vibrates, drag app/widget to the home screen. Figure 4-6: Launcher Page...
IOVU-xxF-AD RISC-based Panel PC 4.2.3 Favorites Tray The Favorites tray at the bottom of each home screen allows users to keep the most important or frequently used shortcuts and folders. Long press an item on the home screen or the launcher/widget page.
IOVU-xxF-AD RISC-based Panel PC 4.2.4 Arranging the Home Screen The items on the home screen can be moved and deleted. Long press an item on the home screen. When it vibrates, drag it where you want. To trash the item on the desktop, drag it to the “X”...
IOVU-xxF-AD RISC-based Panel PC 4.3 Navigation Buttons The three navigation buttons shown in Figure 4-9 can always be found at the bottom of every screen. Figure 4-9: Navigation Buttons Buttons Description Back Tap to return to the previous screen. Home Tap to return to the home screen.
IOVU-xxF-AD RISC-based Panel PC 4.4 Status Bar The status bar on the top of the screen (Figure 4-10) displays the pending notifications and status, such as battery level or signal strength. Figure 4-10: Status Bar Swipe down from the right of the status bar to view the setting shortcut.
IOVU-xxF-AD RISC-based Panel PC Swipe down from the left of the status bar to view notification details. Figure 4-12: Status Bar – Notification Page 41...
IOVU-xxF-AD RISC-based Panel PC 4.5 Settings The Settings menu allows configuration to the IOVU-xxF-AD, such as Wi-Fi, volume, screen brightness, etc. To enter the Settings menu, tap Settings on the launcher page. 4.5.1 WIRELESS & NETWORKS Figure 4-13: Wireless and Networks Settings In the WIRELESS &...
IOVU-xxF-AD RISC-based Panel PC 4.5.1.1 More Settings Figure 4-14: More Settings Menu After tapping More… in the WIRELESS & NETWORKS field, the user can configure the following network settings. Airplane mode: Turns on or turns off the airplane mode. VPN: Sets up and manages Virtual Private Networks (VPNs).
IOVU-xxF-AD RISC-based Panel PC 4.5.2 Sound Figure 4-15: Sound Menu Use the Sound menu to configure the following items. Volumes: Adjusts the volume of alarms, notifications, music, video, games and other media. Default notification sound: Sets up the notification ringtone.
IOVU-xxF-AD RISC-based Panel PC 4.5.3 Display Figure 4-16: Display Menu Use the Display menu to configure the following items. Brightness: Adjusts the screen brightness. Wallpaper: Sets up the wallpaper. Sleep: Sets up the time of inactivity after which the screen turns to sleep mode.
IOVU-xxF-AD RISC-based Panel PC 4.5.4 Storage The Storage menu displays the status of the internal storage, the inserted microSD card and the connected USB storage devices, and allows users to manage the data stored in them. Figure 4-17: Storage Menu...
IOVU-xxF-AD RISC-based Panel PC 4.5.5 Apps The Apps menu displays the applications installed in the device, and allows users to manage them. Figure 4-18: Apps Menu 4.5.6 Users The Users menu allows the user to configure the owner information. Figure 4-19: Users Menu...
IOVU-xxF-AD RISC-based Panel PC 4.5.7 Location Access Figure 4-20: Location Access Menu Use the Location access menu to configure the following items. Access to my location: Turns on to let the apps obtain the user’s location information. GPS satellites: This item is available only when the Access to my location item is enabled.
Enables to show the information of the device owner on the lock screen. Encrypt tablet: Once this item is enabled, the user will need to type a numeric PIN or password to decrypt the IOVU-xxF-AD each time when powering on. Make passwords visible: Enables to show password when typing.
Figure 4-22: Language & Input Menu Use the Language & input menu to configure the following items. Language: Sets up the language for IOVU-xxF-AD. Spell checker: Allows the user to enable the spell check function and configure its settings. Personal dictionary: Configures the user dictionary.
Figure 4-23: Backup & Reset Menu Use the Backup & reset menu to configure the following items. Factory data reset: Erases all data from the internal storage of the IOVU-xxF-AD. 4.5.11 Add account Tap Add account to start setting up an e-mail or corporate account.
IOVU-xxF-AD RISC-based Panel PC 4.5.12 Date & Time Figure 4-25: Date & Time Menu Use the Date & time menu to configure the following items. Automatic date & time: Turns on to use the network-provided time. Set date: Sets up the system date. This item is available only when the Automatic date &...
IOVU-xxF-AD RISC-based Panel PC 4.5.13 Accessibility Figure 4-26: Accessibility Menu Use the Accessibility menu to configure the following items. Magnification gestures: Enables to zoom in and out by triple-tapping the screen. Large text: Turns on to use large text. Speak passwords: Turns on or off the speak password fucntion.
IOVU-xxF-AD RISC-based Panel PC 4.5.14 About Tablet Figure 4-27: About Tablet Menu Use the About tablet menu to display the following items. Additional system updates: Taps to update the system from OTA (over-the-air) or from the microSD card. Status: Taps to display the status of batteries, network, signal, etc.
IOVU-xxF-AD RISC-based Panel PC 4.6 File Management The IOVU-xxF-AD provides a file management tool that allows users to manage files in the internal storage and external storage devices. Tap ES File Explorer on the application page to launch it. Figure 4-28: ES File Explorer Screen The user can tap the storage folder (Figure 4-28) to view all the possible storage devices listed below.
IOVU-xxF-AD RISC-based Panel PC 5.1 Peripheral Interface Connectors The motherboard of the IOVU-xxF-AD comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 5-1. The Pin 1 locations of the on-board connectors are also indicated in the diagrams below. The connector pinouts for these connectors are listed in the following sections.
Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the IOVU-xxF-AD motherboard. Pinouts of these connectors can be found in the following sections.
IOVU-xxF-AD RISC-based Panel PC 5.3 Preconfigured Jumper/Switch Settings CAUTION: The following jumpers/switches are preconfigured for the IOVU-xxF-AD. Users should not change these jumpers (Table 5-17). It is only for reference. Jumper Name Type Label Panel backlight setting 8-pin header Panel selection...
IOVU-xxF-AD RISC-based Panel PC Appendix Regulatory Compliance Page 66...
Page 77
IOVU-xxF-AD RISC-based Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2004/108/EC Low-Voltage Directive 2006/95/EC RoHS II Directive 2011/65/EU Ecodesign Directive 2009/125/EC If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
Page 78
IOVU-xxF-AD RISC-based Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ...
Page 79
IOVU-xxF-AD RISC-based Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Page 80
IOVU-xxF-AD RISC-based Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the IOVU-xxF-AD chassis is opened when the IOVU-xxF-AD is running. Do not drop or insert any objects into the ventilation openings of the IOVU-xxF-AD.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-xxF-AD. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IOVU-xxF-AD is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the IOVU-xxF-AD, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the IOVU-xxF-AD, please read the details below. Page 74...
In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the IOVU-xxF-AD. C loth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the IOVU-xxF-AD.
IOVU-xxF-AD RISC-based Panel PC C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 88
IOVU-xxF-AD RISC-based Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Biphenyls Diphenyl (Pb) (Hg) (Cd) Chromium (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
Need help?
Do you have a question about the IOVU-xxF-AD and is the answer not in the manual?
Questions and answers