Stainless panel pc with intel core i5-6300u / celeron 3955u cpu, touchscreen, usb 2.0, dual gbe lan, rs-232/422/485, ip 69k front panel and rohs (92 pages)
8" panel pc with intel® celeron® processor n6210 (72 pages)
Summary of Contents for IEI Technology IOVU-572M
Page 1
IOVU-572M Panel PC MODEL: IOVU-572M Panel PC, 5.7" Touchscreen, 624 MHz Marvell XScale PXA310, Fast Ethernet, Two USB, 802.11b/g Wireless, RS-232/422/485 RoHS Compliant, IP 64 Protection User Manual Page i Rev. 1.10 – December 26, 2014...
Page 2
IOVU-572M Panel PC Revision Date Version Changes December 26, 2014 1.10 Updated for R11 version: - updated Section 4.5.1 Wireless Connection Setup - updated diagrams in Section 4.3.2.2 August 27, 2013 1.01 Added Section 4.5.1 February 13, 2012 1.00 Initial release...
Page 3
IOVU-572M Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
1.1 Overview Figure 1-1: IOVU-572M The IOVU-572M Panel PC comes with a 5.7" touch screen panel. It is powered by a 624 MHz Marvell XScale PXA310 processor and has 256 MB of SDRAM. The IOVU-572M comes installed with Windows CE 6.0. The package also includes a software development kit and documentation for easy operating system customization according to needs.
IOVU-572M Panel PC I/O and Communications 2 x 10/100 Mb/s Ethernet 1 x RS-232/422/485 Serial Ports 2 x USB host connectors USB Interfaces 2 x 1.5 Watt speakers Audio 1 x Power ON/OFF LED on front panel LED Function SD Card socket...
IOVU-572M Panel PC 1.5 Certifications All IOVU-572M series models comply with the following international standards: RoHS IP 64 For a more detailed description of these standards, please refer to Appendix A. Page 5...
IOVU-572M Panel PC 2.1 Front Panel The IOVU-572M front panel (Figure 2-1) comprises a 5.7" TFT WVGA 16-bit color touch screen LCD in an ABS+PC plastic frame. Figure 2-1: Front Panel 2.2 Connector Panel All external peripheral interface connectors are located on the bottom panel of the IOVU-572M .
Page 16
IOVU-572M Panel PC External peripheral interface connectors on the IOVU-572M include: 1 x DC-IN bare wire terminal block 2 x RJ-45 LAN connectors 1 x RS-232/422/485 connector 2 x USB connectors 1 x Reset button...
IOVU-572M Panel PC 2.3 Dimensions The physical dimensions of the IOVU-572M are shown in Figure 2-3 and listed below: Width: 180 mm Height: 135.8 mm Depth: 46.7 mm Figure 2-3: IOVU-572M Physical Dimensions (millimeters) Page 9...
IOVU-572M Panel PC 2.4 Power Supply WARNING: Whenever you need to remove a part for maintenance or upgrading, switch off the power supply and unplug the power cord first. The IOVU-572M has a terminal block connector on the bottom panel. Page 10...
Follow the anti-static precautions outlined in Section 3.1. Make sure the packing box is facing upwards so the IOVU-572M does not fall out of the box. Make sure all the components shown in Section 3.3 are present.
If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IOVU-572M from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
IOVU-572M Panel PC 3.4 Optional Items Item and Part Number Image Panel mount kit ALFPK-08 VESA 75 wall mount kit AFLWK-07 LCD monitor/PPC stand kit for VESA 75, up to 5kg STAND-A08-RS 12V/5A DC 60W power adapter with bare wire,...
IOVU-572M. 4.2 SD Card Installation The IOVU-572M supports a single SD card. To install the SD card, follow the steps below. Undo the SD card cover screw. Step 1: Slide open the SD card cover.
IOVU-572M Panel PC Figure 4-1: SD Card Installation 4.3 External Peripheral Interface Connectors Table 4-1 lists the external interface connectors on the IOVU-572M. Detailed descriptions of the connectors can be found in the following table. Connector Type 12-36 V DC bare wire power terminal...
This section outlines the usage and setup of the serial port on the rear I/O panel. 4.3.2.1 Connecting the Serial Port The IOVU-572M has a single female DB-9 connector on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the IOVU-572M.
IOVU-572M Panel PC Figure 4-4: Serial Device Connector Secure the connector. Secure the serial device connector to the external Step 2: interface by tightening the two retention screws on either side of the connector. Step 0: 4.3.2.2 RS-232/422/485 Selection To select RS-232, RS-422, or RS-485 mode, please follow the directions below.
IOVU-572M Panel PC Figure 4-5: Serial Port Mode Setting Click "Save Registry" to save the changes. Step 3: Figure 4-6: Confirm Serial Port Mode Setting Confirm save changes. Click “Yes” to continue. Step 4: Page 20...
IOVU-572M Panel PC Figure 4-7: Confirmation Window Settings will take effect after the system reboots. Click “Yes” to restart. Step 5: Figure 4-8: Restart Page 21...
The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IOVU-572M. Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into Step 1: the USB Series "A"...
To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Align the connectors. Align the RJ-45 connector on the LAN cable with one of Step 1: the RJ-45 connectors on the IOVU-572M. See Figure 4-11. Page 23...
IOVU-572M Panel PC Figure 4-11: LAN Connection Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN Step 2: cable RJ-45 connector into the on-board RJ-45 connector. Step 0: The Ethernet connector pinouts are shown below. DESCRIPTION TPT+...
Arm mounting The mounting methods are described below. 4.4.1 Wall Mounting To mount the IOVU-572M onto the wall, please follow the steps below. Select the location on the wall for the wall-mounting bracket. Step 1: Carefully mark the locations of the four screw holes in the bracket on the wall.
Insert the four monitor mounting screws provided in the wall mounting kit into the Step 6: four screw holes on the real panel of the IOVU-572M and tighten until the screw shank is secured against the rear panel (Figure 4-14).
IOVU-572M Panel PC NOTE: In the diagram below the bracket is already installed on the wall. Figure 4-14: Chassis Support Screws Secure the panel PC by fastening the retention screw of the wall-mounting Step 9: bracket. (Figure 4-15). Page 27...
Select the position on the panel to mount the IOVU-572M. Step 1: Cut out a section from the panel that corresponds to the rear panel dimensions Step 2: of the IOVU-572M. Take care that the panel section that is cut out is smaller than Page 28...
IOVU-572M Panel PC the overall size of the frame that surrounds the IOVU-572M but just large enough for the rear panel of the IOVU-572M to fit through (see Figure 4-16). Figure 4-16: IOVU-572M Panel Opening (mm) Slide the IOVU-572M through the hole until the frame is flush against the panel.
4.4.3 Arm Mounting The IOVU-572M is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75 mm interface pad. To mount the IOVU-572M on an arm, please follow the steps below. The arm is a separately purchased item. Please correctly mount the arm onto Step 1: the surface it uses as a base.
Figure 4-19: Stand Mounting 4.5 Software The IOVU-572M comes with a pre-installed Windows CE 6.0 operating system and a rich software application development kit. For information about configuring the operating system, adding remote management tools or additional software and drivers, refer to the...
IOVU-572M Panel PC user manuals on IEI IOVU Utility CD that came with the IOVU-572M. The IOVU includes the following software: Standard Windows® CE 6.0 professional version license. Optional Board Support Package (BSP) for customers to customize their own OS image.
IOVU-572M Panel PC Figure 4-21: Laird Connection Manager–Scan The Admin Login window appears (Figure 4-22). Leave the password field Step 4: blank and click OK. (Note: the network password will be entered later.) Figure 4-22: Laird Connection Manager–Admin Login Click Yes in Figure 4-23 to create a new network profile.
IOVU-572M Panel PC Figure 4-24: Laird Connection Manager–Manage Profiles Scroll down to the bottom and click Passphrase. Enter the password for the Step 7: network in the Value field. Click the Commit button to connect the network. Click OK to close the window. See Figure 4-25.
IOVU-572M Panel PC Figure 4-26: Laird Connection Manager–Select Network When the network is successfully connected, the icon in the notification area (as Step 9: shown in Figure 4-27) appears. Figure 4-27: Network Connected Page 35...
IOVU-572M Panel PC A.1 RoHS Compliant All models in the IOVU series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant. The RoHS Directive bans the placing on the EU market of new electrical and electronic...
IOVU-572M is being installed, moved or modified. Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the IOVU-572M chassis is opened when the IOVU-572M is running. ...
When maintaining or cleaning the IOVU-572M, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the IOVU-572M, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any other ...
Some components in the IOVU-572M may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the IOVU-572M. ...
Page 50
IOVU-572M Panel PC must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 51
IOVU-572M Panel PC FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IOVU-572M Panel PC C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 54
IOVU-572M Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
Need help?
Do you have a question about the IOVU-572M and is the answer not in the manual?
Questions and answers