Table of Contents
Advertisement
Dräger Polytron 7500 software dongles
Intended Use
Dräger Polytron 7500 software dongle – 83 17 618, 83 17 619 or 8317860:
— For activating additional functions in the Dräger Polytron 7500:
Data Dongle
83 17 618
Colour code blue
Sensor Dongle
83 17 619
Colour code silver
Sensor Diagnostic Dongle
83 17 860
Colour code green
Installing the software dongles
Remove the cover from the Polytron 7500.
Loosen lock below the Polytron 7500 and remove the unit from the docking sta-
tion.
— The Polytron 7500 must be disconnected from the mains!
1 The Dräger logo on the dongle should be facing to the front. Then insert the don-
gle into any of the three slots.
Up to three dongles may be installed simultaneously.
Insert the Polytron 7500 back into the docking station
Place the cover back on.
Note:
The correct operation of the software dongle can be checked by switching
the measuring unit on and selecting the menu items » Information «,
» Instrument «, » Module « from the unit menu, see page 36.
9023927 - 2nd edition - May 2007
— Activates the Event Logger, the Datalogger
and the graphical concentration display.
— Activates the sensor self-test.
— Activates the sensor self-test, the display of
the remaining sensor lifetime and the sensor di-
agnostic function.
Installing accessories
1 1 1
Page 15 of 72 Pages
Advertisement
Table of Contents
