– Connect Dräger Pac 7000 and the test gas cylinder to the Turning the instrument off calibration adapter or connect Dräger Pac 7000 to the Dräger Bump Test Station.
– To enter the calibration menu press the [+] 3 times within – To change the adjusted calibration concentration press [+]. – To adjust the operation timer connect Dräger Pac 7000 to a 3 seconds. The instrument beeps twice, quickly. The notice The first digit flashes.
Alarms – Open the front case and remove the depleted battery. 10.1 Trouble shooting errors – Press and hold [OK] for approx. 3 seconds while battery is Code Cause Remedies Concentration Pre/Main Alarms not installed. Flash / EEprom write Contact Service –...
11.3 Sensor Specifications and Instrument Configuration Principle of measurement is an electrochemical 3-electrode sensor. Oxygen (O ) cannot be measured in the presence of Helium (He)! The Type-Examination-Certificate covers the measuring function for Oxygen enrichtment and defficiency. Cross sensitivity factors ≤...
Page 6
Dräger Bump Test Station “Printer” complete with test gas cylinder 58 L, including Auto Detect Function for 83 21 008 Pac 7000 (gas type by customer request) 1) Please be aware of limited lifetime of sensors. Excessive storage reduces operating time of sensors. Temperature range of storage is 0 to 35 C (32 to 95 2) Please be aware of special settings by customer requirements.
Need help?
Do you have a question about the Pac 7000 and is the answer not in the manual?
Questions and answers