For Your Safety - Dräger Polytron 7500 Instructions For Use Manual

For Your Safety

For Your Safety
Strictly follow the Instructions for Use
Any use of the Polytron 7500 requires full understanding and strict observation of
these Instructions for Use. The Polytron 7500 is only to be used for the purpose
specified here.
Maintenance
The Polytron 7500 must be inspected and serviced regularly by suitably qualified
persons. Repair and general overhaul of the Polytron 7500 may only be carried out
by trained service personnel.
We recommend that a service contract be obtained with Dräger Safety and that
all repairs also be carried out by them.
Only authentic Dräger spare parts may be used for maintenance.
Observe chapter "Maintenance intervals".
Do not operate in explosion-hazard areas
The Polytron 7500 is not suitable for use in explosion-hazard areas.
Accessories
Do not use accessory parts other than those listed in the order list
Liability for proper function or damage
The liability for the proper function of the Polytron 7500 is irrevocably transferred to
the owner or operator to the extent that the Polytron 7500 was serviced or repaired
by personnel not employed or authorised by Dräger Safety or when the Polytron
7500 was used in a manner not conforming to its intended use.
Dräger Safety cannot be held responsible for damage caused by non-compliance
with the recommendations given above. The warranty and liability provisions of the
terms of sale and delivery of Dräger Safety are likewise not modified by the recom-
mendations given above.
Dräger Safety AG & Co. KGaA
Page 4 of 72 Pages
9023927 - 2nd edition - May 2007