Sub-Menu » Datalogger - Dräger Polytron 7500 Instructions For Use Manual

The menu » Information «
Sub-menu » Datalogger «
The sub-menu » Datalogger « contains the functions for interrogating the Datalog-
ger.
Datalogger status
This function is active only if the Polytron 7500 is equipped with the data dongle
83 17 618, see page 15.
— This function displays the status of the Datalogger and the Eventlogger.
Select the menu items » Information «, » Datalogger « and » Datalgr. status «
in this order, pressing the »
— The current status of the Datalogger and the Eventlogger is displayed:
Datalogr. : on or off (the Datalogger is on or off)
Evntlogr. : on or off (the Eventlogger is on or off)
— Activating / deactivating the Datalogger: see page 59.
— Activating / deactivating the Eventlogger: see page 59.
Show graph
This function is active only if the Polytron 7500 is equipped with the data dongle
83 17 618, see page 15.
— The measured values of the sensor are displayed graphically on a time axis of
15 minutes.
Select the menu items » Information «, » Datalogger « and » Show graph « in this
order, pressing the »
OK
Page 38 of 72 Pages
« key after each selection.
OK
« key after each selection.
9023927 - 2nd edition - May 2007